ASTM A516 Grade 70 Plate Supplier in Medak
Chiranjiv Steel Centre is a trusted supplier and stockist of ASTM A516 Grade 70 plates, supplying the process equipment, tankage and boiler fabricators who work across Medak district and the industrial belt that grew up around it. A reorganisation in October 2016 carved Sangareddy and Siddipet out of the erstwhile Medak district, which is why the Patancheru and Bollaram estates, laid out from the 1970s onwards, now carry a Sangareddy address while buyers on that ground still search on the older district name.
Our plate sits in two Navi Mumbai yards, at Taloja and Kalamboli, and runs to approximately 2000 tonnes. Kalamboli is approximately 632 km by road from the Patancheru belt and approximately 685 km from Medak town, with Taloja adding roughly twelve kilometres to either figure. Vehicles take the Mumbai-Pune Expressway, hold NH-65 through Solapur, then either continue east to Patancheru or leave the highway at Zaheerabad for the run north through Jogipet. Orders against ready stock are dispatched in 2 to 3 working days.
Stocked plate covers 3 mm to 20 mm thickness, in widths of 1250 mm and 1500 mm against lengths of 5000 mm and 6300 mm. Heavier material is arranged on an order basis, to 100 mm. Ready-stock plate to 20 mm leaves in the as-rolled condition, which the standard treats as normal supply at 40 mm and under. Material over 40 mm is supplied normalised against order, and the delivery condition prints on the certificate in either case. Dual certification covers ASTM A516 Gr 70 and ASME SA 516 Gr 70, with an EN 10204 3.1 Mill Test Certificate provided with every order. Custom sizes can be arranged to your drawing. Send the thickness, size and tonnage you need, and we’ll quote against what’s on the floor.
On this Page
- ASTM A516 Grade 70 plate supplier in Medak
- Stock position behind a Medak belt enquiry
- What buying off the floor alters
- Ready-stock sizes that turn over fastest
- ASTM A516 / ASME SA 516 Grade 70 datasheet
- Paperwork that reaches your inspection desk
- Plate price in Medak
- Which plants across the Medak belt order Grade 70 plate
- Packing, marking and transport into Telangana
- Industrial areas we deliver into
- Five reasons Medak buyers order direct
- Frequently asked questions
Stock Position Behind a Medak Belt Enquiry
| Supply Parameter | Our Position |
|---|---|
| Thickness in stock | 3 mm to 20 mm |
| Thickness against order | Up to 100 mm |
| Width | 1250 mm and 1500 mm |
| Length | 5000 mm and 6300 mm |
| Delivery condition | As-rolled to 20 mm out of ready stock; normalised above 40 mm, against order |
| Supplementary testing | HIC certificate, ultrasonic examination and third party inspection, against order |
| Cutting | Cut-to-size worked from stock plates against your list |
Dimensions outside that list are arranged on an order basis. Share a drawing or a cutting plan, and we’ll price the plate you need.
What Buying Off the Floor Alters on a Medak Order
Fabricators in Medak choosing ASME SA 516 Gr 70 plates can avail a lot of benefits, which are shown in the table below.
| Where the order stalls | What buying from stock alters |
|---|---|
| A rolling programme puts plate four to six weeks out while a half-built vessel occupies the bay. | Approximately 2000 tonnes is already on the floor at Taloja and Kalamboli. Confirmed orders load within 2 to 3 working days. |
| The drawing calls for one delivery condition and the yard books another. | Condition is agreed when the order is placed, and it appears on the certificate. |
| A certificate query surfaces after the load has already covered approximately 632 km. | Your inspection desk holds the MTC before the vehicle leaves the yard. |
| Freight gets paid on a full plate when the job consumes two thirds of it. | We cut to your list first, so the tonnage on the vehicle is tonnage that enters the vessel. |
| One small reactor shell won’t fill a truck on a route this long. | Part loads move on the Mumbai to Hyderabad corridor, and three jobs can share a vehicle. |
| A project needs plate in stages and the yard wants the lot cleared at once. | We hold the balance in Navi Mumbai and release it truck by truck against your site call-off. |
| A Maharashtra delivery and a Telangana delivery are taxed on different heads. | Deliveries inside Maharashtra carry CGST and SGST. A Medak consignment leaves the state, so the invoice carries IGST as one creditable line. |
Ready-Stock Sizes That Turn Over Fastest
Ready stock is built around what moves quickest through reactor, tank and exchanger work in this belt. Light plate from 3 mm covers internals and lining duty. The 8 mm to 20 mm band absorbs most shell tonnage. Indicative combinations follow, given as thickness, width and length in millimetres:
| Size | Size | Size | Size | Size |
|---|---|---|---|---|
| 3 × 1250 × 5000 | 5 × 1250 × 6300 | 6 × 1500 × 6300 | 8 × 1250 × 5000 | 8 × 1500 × 6300 |
| 10 × 1250 × 6300 | 10 × 1500 × 6300 | 12 × 1250 × 5000 | 12 × 1500 × 6300 | 14 × 1500 × 6300 |
| 16 × 1250 × 6300 | 16 × 1500 × 6300 | 18 × 1500 × 6300 | 20 × 1250 × 6300 | 20 × 1500 × 6300 |
Stock rotates against despatches weekly, so check your size list with us before a cutting programme is frozen.
ASTM A516 / ASME SA 516 Grade 70 Datasheet
Paperwork That Reaches Your Inspection Desk
An incoming inspection team opens the file before the bundle, and a certificate arriving behind the vehicle stops unloading. Six items make up a standard despatch package:
- EN 10204 3.1 Mill Test Certificate, raised against each plate rather than against a batch.
- A single document carrying both designations, ASTM A516 Gr 70 alongside ASME SA 516 Gr 70.
- Heat number and plate number hard stamped into the plate face, keeping steel and paper matched through cutting.
- Cast analysis, tensile results and the recorded delivery condition on that same certificate.
- Pre-despatch inspection at Taloja or Kalamboli, by your own engineer or an agency you appoint.
- HIC certificate to NACE TM0284, ultrasonic examination and third-party inspection, arranged against the order.
Sour-service qualification to NACE MR0175 or MR0103 sits outside our supply programme. We say so while quoting where an enquiry carries that requirement, not after the plate has shipped.
ASTM A516 Gr.70 Plate Price in Medak
A516 Gr 70 plate for Medak district delivery is quoted from approximately ₹65-95 per kg ex-yard Kalamboli or Taloja for boiler quality material. An offer holds for the validity period printed on it, since plate rates track scrap and steel price movement.
Six Variables That Move the Quoted Rate
Six factors decide the figure on any given enquiry:
- Dimensions. Plate thicker than 20 mm, or wider than 1500 mm, carries a size premium over the standard stock envelope.
- Tonnage. A bulk release prices below a cut-piece order on the same thickness.
- Delivery condition. Normalising and stress relieving each add a processing cycle over as-rolled plate.
- Test scope. A HIC package lengthens the lead time and lifts the rate.
- Certificate type. EN 10204 3.1 comes as standard; Type 3.2 needs third-party endorsement and is charged separately.
- Cutting scope. Profile work and edge preparation are priced off the drawing, never off a rate card.
Contact us at Chiranjiv Steel Centre for the current pricing of SA 516 Gr 70 plates in Medak.
Looking for ASTM A516 Grade 70 Plates?
Which Plants across the Medak Belt Order Grade 70 Plate?
Demand in this belt is sorted by estate rather than by town. Bulk drug and pharmaceutical capacity concentrates at Pashamylaram, Gaddapotharam and Kazipally, while boiler and thermal utility work clusters around Bollaram and Bonthapally. Ordnance and heavy engineering fabrication runs along the Patancheru to Ramachandrapuram stretch. Medak district proper, together with the Zaheerabad corridor, carries agro processing and project tankage. Four buyer groups take most of the Grade 70 tonnage we send into Telangana, and each one orders on a different rhythm.
Bulk Drug and Pharmaceutical Process Plants
Fabricators serving the bulk drug plants at Pashamylaram, Gaddapotharam and Kazipally build jacketed reactors, solvent receivers, distillation column shells and condenser bodies in this grade. Shell courses in the 8 mm to 20 mm band come straight off ready stock. Dished end blanks and wider sizes are arranged against order. Where a process stream carries wet hydrogen sulphide, the enquiry asks for HIC-tested plate, and we issue the HIC certificate with the material. Those estates sit in Sangareddy district today, though their fabrication base grew up when the whole belt was administered as Medak.
Boiler and Thermal Utility Equipment Shops
Steam is the shared utility across every chemical estate in this belt, and shops around Bollaram and Bonthapally build the equipment that raises and carries it. Package boiler shells, deaerator vessels, thermic fluid heater bodies and blowdown tanks all run on A516 Gr 70, a grade written for welded pressure equipment in moderate and lower temperature service where notch toughness governs the selection. Each plate travels with its heat number, plate number and matching EN 10204 Type 3.1 certificate.
Ordnance and Heavy Engineering Fabrication
Heavy engineering along the Patancheru, Isnapur and Ramachandrapuram stretch works to a build-to-drawing culture rather than a job-shop one, and the ordnance factory at Yeddumailaram anchors a supplier base that has fabricated to specification for decades. Air receivers, plant utility pressure parts, storage vessels and general heavy fabrication account for the tonnage here. Enquiries here arrive as cutting lists, not plate counts. We cut before loading, so a vehicle carries finished pieces rather than future offcut.
Agro Processing and Project Tankage in Medak District and the Zaheerabad Corridor
Medak district proper carries less chemical capacity than its western neighbour, and its industrial base leans towards agro processing, seed handling and food manufacture around Toopran, Manoharabad, Narsapur, Chegunta and Ramayampet. Steam-heated cookers, oil expeller vessels and hot water storage take this grade. Buying along the Zaheerabad corridor, where the manufacturing zone at Nyalkal and Jharasangam is under development, moves instead to project lots with staggered release against a site programme.
Packing, Marking and the Transportation Cost Into Telangana
A run of approximately 632 km puts more load on packing than a regional delivery does, and every handling point risks losing plate identification.
Packaging: strapped bundles as standard, moving to wooden cases or crates where thickness and quantity warrant it
Marking: heat number and specification hard stamped on each plate, so the steel stays identifiable against its certificate through fabrication
Inspection: your engineer or a nominated third party is welcome at the yard ahead of loading
Terms of supply: ex yard at Kalamboli or Taloja, or delivered into your works
Service area: Medak district, the Patancheru and Sangareddy estates, the Zaheerabad corridor and the wider Telangana market
Despatch and transit: standard sizes load within 2 to 3 working days of confirmation; cut sizes take a further 2 to 3 working days; the transportation cost is fixed with the transporter at booking
Industrial Areas We Deliver Into
- Toopran, Kallakal and the northern highway belt
- Manoharabad and Kucharam
- Chegunta and Ramayampet
- Narsapur and Shivampet
- Medak town, Papannapet and Havelighanpur
- Hathnoora, Kowdipally and Yeldurthy
- Patancheru, Isnapur and Beeramguda
- IDA Pashamylaram and IDA Bollaram
- Bonthapally, Jinnaram and Gaddapotharam
- Kazipally and Yeddumailaram
- Sangareddy, Kandi and Sadasivpet
- Zaheerabad, Nyalkal and Jharasangam
Five Reasons Medak Buyers Order Direct From Chiranjiv Steel Centre
There are five practical reasons Medak buyers order direct from Chiranjiv Steel Centre:
- Established in 2000. Over two decades in the plate trade, spent on pressure part requirements rather than steel prices alone.
- Approximately 2000 tonnes on the floor. A holding band of 3 mm to 20 mm keeps a rolling programme off your critical path.
- Cutting before loading. Plates leave at your sizes, which counts for more on a 632 km haul than a local one.
- Documentation ahead of the vehicle. EN 10204 3.1 certification with full heat and plate traceability, sent before the load moves.
- Sizes that nest. Widths of 1250 mm and 1500 mm against lengths of 5000 mm and 6300 mm trim offcut on common shell developments.
Send the grade, thickness, size and tonnage, and a Medak quote goes back the same working day.
