ASTM A516 Grade 70 Plate Supplier in Pune
Chiranjiv Steel Centre supplies ASTM A516 Grade 70 plates to pressure vessel, boiler and heat exchanger fabricators in Pune, formerly known as Poona during the British colonial period, and nearby industrial areas. Around 2,000 MT of plate stock is held at our Taloja and Kalamboli facilities in Navi Mumbai, allowing material to be dispatched directly to customers in Pune without waiting for mill production. Kalamboli is 114 km from Pune and provides direct access to the Mumbai–Pune Expressway, supporting regular road deliveries to Pune. Depending on stock availability, order quantity and processing requirements, confirmed orders can generally be arranged for next-working-day delivery. Material can be supplied in as-rolled or normalised condition, as specified at the time of order, with the relevant material test certificate.
Our stock covers plates from 3 mm to 20 mm thickness in widths of 1250 mm and 1500 mm, and lengths of 5000 mm and 6300 mm. Thicker plates, up to 100 mm, can be arranged on order. Every plate we hold is dual certified to ASTM A516 Gr 70 and ASME SA 516 Gr 70 and comes with a Mill Test Certificate as per EN 10204 3.1.
On this Page
SA 516 Gr 70 Steel Quick Specs and Pune
| Stock Detail | What We Offer |
|---|---|
| Ready stock quantity | 2000 tons |
| Thickness in stock | 3 mm to 20 mm |
| Thickness on order | Up to 100 mm |
| Plate width | 1250 mm and 1500 mm |
| Plate length | 5000 mm and 6300 mm |
| Supply Condition | As-rolled across the ready-stock range; normalised condition specified on the purchase order, against order |
| Certification | Dual certified ASTM A516 Gr 70 / ASME SA 516 Gr 70 |
| Test certificate | Mill Test Certificate as per EN 10204 3.1 |
| Warehouse location | Taloja and Kalamboli, Navi Mumbai |
Why Pune Fabricators Buy SA 516 70 Carbon Steel From Our Mumbai Stock
| What holds up the job | What stock supply does |
|---|---|
| Mill lead time runs into weeks. The vessel waits. | Plate is approximately 114 km away at Kalamboli. Most orders reach Pune the next working day. |
| Drawing calls for normalised. A rolled plate arrives. | Condition is fixed when you order and printed on the certificate. |
| Certificate mismatch is found at your gate. The plate goes back. | The certificate reaches your QA team before the vehicle is loaded. |
| A full plate is bought. Half of it stays as offcut. | Plates are cut to your sizes before dispatch. |
| Freight is heavy on a small quantity. | Part loads move on this route. Three jobs load on one vehicle. |
| An out of state invoice adds IGST to reconcile. | Maharashtra to Maharashtra is intra state. CGST and SGST. |
Ready-Stock A516 Gr.70 Plate Sizes
| Size | Size | Size | Size | Size |
|---|---|---|---|---|
| 6 × 2000 × 12000 | 8 × 2500 × 12000 | 10 × 2000 × 12000 | 10 × 2500 × 12000 | 10 × 2500 × 6000 |
| 12 × 2000 × 12000 | 12 × 2500 × 12000 | 14 × 2000 × 12000 | 14 × 2000 × 5400 | 14 × 2500 × 12000 |
| 16 × 2000 × 12000 | 16 × 2500 × 12000 | 18 × 2500 × 12000 | 20 × 2500 × 12000 | 22 × 2000 × 11500 |
| 25 × 2500 × 12000 | 25 × 2500 × 9000 | 32 × 2500 × 6000 | 32 × 2500 × 3000 | 36 × 2500 × 6000 |
| 40 × 2500 × 6000 | 40 × 2500 × 7000 | 75 × 2500 × 4100 | 90 × 2500 × 6800 | 90 × 1500 × 2700 |
Stock turns over continuously, so confirm availability against your size before you plan the cutting schedule.
ASTM A516 / ASME SA 516 Grade 70 Datasheet
Testing and Certification
Every supply from our stock carries the documents a Pune QA engineer will ask for:
- Mill Test Certificate as per EN 10204 3.1 issued against each plate.
- Dual certification covering ASTM A516 Gr 70 and ASME SA516 Gr 70 on the same MTC.
- Heat number and plate number traceability, with hard stamping on the plate.
- Chemical analysis, tensile results, and heat treatment condition recorded on the certificate.
- Inspection of material at our Taloja and Kalamboli warehouses before dispatch, by the buyer or their appointed agency.
- Ultrasonic testing and third party inspection (any agency of your choice) on request
ASTM A516 Gr.70 Plate Price in Pune City
What Affects ASTM A516 Gr.70 Plate Price
Six variables move the rate on any given day:
- Thickness, width and length: Plate above 20 mm and widths above 1500 mm carry a size extra over standard stock sizes.
- Order quantity: Full-plate and multi-tonne orders are rated below cut-piece quantities.
- Supply condition: Normalised, stress relieved and vacuum degassed plate costs more than as-rolled because of the extra processing cycle.
- Test scope: HIC testing to NACE/AMPP TM0284 adds cost and lead time.
- Certification level: EN 10204 3.1 is standard; 3.2 requires third-party endorsement and is priced separately.
- Cut-to-size requirement: Profile cutting and edge preparation are quoted against the drawing.
Looking for ASTM A516 Grade 70 Plates?
Who Uses ASTM A516 Grade 70 Plate in Pune
Pune and its surrounding industrial belts have a strong base of pressure vessel, boiler, heat exchanger and process equipment fabricators. Four end uses take most of our Grade 70 tonnage. Our A516 Grade 70 plate despatches: pressure vessel fabricators, boiler manufacturers, heat exchanger shops, and EPC contractors. Each group orders the grade in a different way, and we have described this below.
Pressure Vessel Fabricators
Pressure vessel fabricators in Chakan MIDC and Bhosari MIDC use A516 Gr 70 for air receivers, storage vessels, columns, and reactors. Shell courses typically consume our 3 mm to 20 mm stock. Dished end blanks in wider sizes can be arranged against order.
Boiler Manufacturers
Every plate is supplied with its heat number, plate number and matching EN 10204 Type 3.1 mill test certificate, so your QA file is complete on arrival. Where the job is a boiler under the Indian Boiler Regulations, IBR certification is a separate requirement: please confirm this with us at the enquiry stage, as our stock is supplied against EN 10204 Type 3.1 documentation. Boiler shells, drums, and headers built in and around Pimpri Chinchwad run on this grade.
Heat Exchangers and Process Equipment Fabricators
Fabricators in Chakan and Ranjangaon use SA 516 Gr 70 for shells, channel covers, and tube sheet backing in shell and tube exchangers built for refinery and chemical plant orders.
EPC Contractors and Project Fabricators
EPC contractors handling projects in Ranjangaon, Talegaon, and other industrial belts around Pune order in project lots. They usually need staggered deliveries matched to a fabrication schedule. We hold their tonnage at Taloja or Kalamboli and release truck by truck as the site calls for material.
How A516 Gr 70 Plates are Packed
A516 Gr 70 plates are sent out in bundles or wooden cases, hard stamped for full traceability. Packing, marking, inspection and delivery terms are given below.
Pune Areas We Deliver Into
- Bhosari MIDC and Pimpri Chinchwad
- Chakan MIDC and Khed taluka
- Talegaon MIDC and Talwade
- Ranjangaon MIDC and Sanaswadi, Shirur taluka
- Hinjawadi and Chinchwad
- Hadapsar and Chikhali
- Kurkumbh MIDC, Daund taluka
- Baramati MIDC and Jejuri MIDC
- Pune city and Pune Nagar Road belt
Why Buy ASTM A516 Grade 70 Plate From Chiranjiv Steel Centre
There are 5 practical reasons Pune fabricators keep coming back to us:
- 25+ years in the plate trade. We understand pressure part requirements, not just steel prices.
- 2000 tons on the floor. Ready stock from 3 mm to 20 mm means no waiting for mill rolling schedules.
- Two warehouses near the expressway. Taloja and Kalamboli give Pune buyers next-day material.
- Clean documentation. EN 10204 3.1 certificates with full traceability, so your QA file doesn’t stall.
- Standard sizes that cut well. Widths of 1250 mm and 1500 mm with lengths of 5000 mm and 6300 mm reduce plate wastage on common shell developments.
Call us or send your enquiry with grade, thickness, size, and quantity. Quotes for A516 Gr 70 plates go out the same day.
