ASTM A516 Grade 70 Plate Supplier in Indore
Chiranjiv Steel Centre works as a supplier and stockist of ASTM A516 Grade 70 plates, supplying the pressure vessel, boiler and process equipment shops that operate in and around Indore. Plate is held in two Navi Mumbai yards, Taloja and Kalamboli, and the holding runs to approximately 2000 tonnes. Kalamboli is approximately 590 km from Indore by road. Vehicles head north through the Nashik and Dhule corridor, then hold NH-52 past Sendhwa into the city. Measured against the southern markets we load for, Indore is a short haul, and it’s the freight line that carries the savings rather than a promised delivery date. Orders against ready stock leave the yard in 2 to 3 working days, with the road leg fixed against the transporter’s schedule at booking.
The stocked band covers 3 mm to 20 mm thickness, in widths of 1250 mm and 1500 mm, at lengths of 5000 mm and 6300 mm. Heavier material is arranged against order, to 100 mm. Plate at 40 mm and under leaves as-rolled, which covers our full 3 mm to 20 mm ready stock; material above 40 mm is supplied normalised against order, and cut-to-size work is taken off those same stock plates. Dual certification covers ASTM A516 Gr 70 and ASME SA 516 Gr 70, with an EN 10204 3.1 Mill Test Certificate raised plate by plate.
Our Stock Position on A516 Gr 70 Plate for Indore Orders
| Supply Parameter | Our Position |
|---|---|
| Ready stock held | Approximately 2000 tonnes |
| Thickness from stock | 3 mm to 20 mm |
| Thickness against order | Up to 100 mm |
| Width | 1250 mm and 1500 mm |
| Length | 5000 mm and 6300 mm |
| Supply condition | As-rolled to 20 mm from ready stock; normalised above 40 mm, against order |
| Grade certification | Dual certified ASTM A516 Gr 70 / ASME SA 516 Gr 70 |
| Cut-to-size | Taken from stock plates against your cutting list |
| Stock location | Taloja and Kalamboli, Navi Mumbai |
How Does Buying From Stock Change an Indore Purchase?
| Where an Indore order stalls | What buying from stock alters |
|---|---|
| A rolling slot pushes delivery four to six weeks out while the vessel stands half built. | Approximately 2000 tonnes is already rolled, certified and lying at Taloja and Kalamboli. A confirmed order loads in 2 to 3 working days. |
| The purchase order names one supply condition and something else arrives at the works. | Condition is agreed at booking and printed on the certificate. |
| A certificate query surfaces at a gate approximately 590 km away from the yard. | Your QA desk holds the MTC before the vehicle is loaded. |
| Freight gets paid on plate that ends its life in the offcut bay. | We cut to your list first, so the tonnage on the vehicle is tonnage that enters the job. |
| A single vessel will not fill a truck on its own. | Indore and Dewas requirements consolidate onto one part load along this corridor. |
| A purchase across the state border complicates the accounting entry. | Madhya Pradesh takes an IGST invoice, one creditable line, instead of the split CGST and SGST charge that applies on a Maharashtra delivery. |
Indicative Stock Sizes Against an Indore Cutting List
| Size | Size | Size | Size |
|---|---|---|---|
| 3 × 1250 × 5000 | 4 × 1500 × 6300 | 5 × 1250 × 6300 | 6 × 1500 × 5000 |
| 8 × 1250 × 5000 | 8 × 1500 × 6300 | 10 × 1250 × 6300 | 10 × 1500 × 6300 |
| 12 × 1250 × 5000 | 12 × 1500 × 6300 | 14 × 1250 × 6300 | 14 × 1500 × 5000 |
| 16 × 1250 × 5000 | 16 × 1500 × 6300 | 18 × 1500 × 6300 | 20 × 1500 × 5000 |
ASTM A516 / ASME SA 516 Grade 70 Datasheet
The Document File That Travels With Every Plate
Incoming inspection at an Indore works starts on paper. A vehicle that reaches the gate ahead of its documents waits in the yard.
- EN 10204 3.1 Mill Test Certificate, raised against each plate rather than against a batch
- Both designations on one document, ASTM A516 Gr 70 together with ASME SA 516 Gr 70
- Heat number and plate number hard stamped into the plate face, keeping steel and paperwork matched through cutting
- Cast analysis, tensile results and the recorded delivery condition, all on that same certificate
- Pre-despatch inspection at Taloja or Kalamboli, carried out by your engineer or an agency you appoint
- HIC testing to NACE TM0284 with a test report, ultrasonic examination and third party inspection, arranged against the order
Sour-service qualification under NACE MR0175 or MR0103 sits outside our supply programme. Where an enquiry carries that clause, we flag it while quoting rather than after despatch.
ASTM A516 Gr.70 Plate Price in Indore
A516 Gr 70 plate for Indore delivery is quoted from approximately ₹65-95 per kg ex-yard Taloja or Kalamboli for boiler quality material. Road freight carries its own line on the offer, since the rate per tonne falls sharply once a vehicle fills, and the Indore run fills more cost-effectively than the long southern hauls. Marketplace listings covering Indore blend commercial carbon steel plate into the same band as pressure vessel quality material, so we quote against a specification instead of a category. An offer holds for the validity printed on it, because plate rates track scrap and mill movement week by week.
Inputs That Decide Your Quoted Rate
Six inputs set the figure on any Indore enquiry:
- Dimensions. Plate thicker than 20 mm, or wider than 1500 mm, carries a size premium over the stock envelope.
- Tonnage. A bulk release prices below a cut-piece requirement of the same grade.
- Delivery condition. Normalising and stress relieving add a processing cycle, and that cycle sits inside the rate.
- Supplementary testing. A HIC package to NACE TM0284 lengthens lead time and lifts the figure.
- Certificate type. EN 10204 3.1 comes as standard. Type 3.2 needs third-party endorsement and is charged separately.
- Cutting scope. Profile work and edge preparation get priced off the drawing, never off a rate card.
For the current pricing of A516 Gr 70 plates in Indore, reach out to us.
Looking for ASTM A516 Grade 70 Plates?
Where is A516 Grade 70 Plate Used Around Indore?
Indore is a fabrication and OEM belt rather than a refinery city, so Grade 70 tonnage moves here in smaller and more frequent lots than it does on the coast. Four industrialist groups take most of what we send into Madhya Pradesh: pharmaceutical and chemical equipment builders, food and agro plant fabricators, package boiler and heater assemblers, and the job shops serving the engineering and auto-component base.
Pharmaceutical and Speciality Chemical Plant Equipment Builders
Soya, Edible Oil and Food Plant Fabricators
Boiler and Thermic Fluid Heater Builders
Utility Vessel Work for the Engineering and Auto-Component Belt
Packing and the Road Leg Into Madhya Pradesh
Industrial Areas We Deliver Into Around Indore
- Pithampur Sector 1, Sector 2 and Sector 3, Dhar district
- Sanwer Road Industrial Area
- Laxmibai Nagar Industrial Estate
- Palda Industrial Area
- Rau and the Rau bypass belt
- Manglia and Sanwer
- Mhow, also known as Dr Ambedkar Nagar
- Dewas Industrial Areas 1, 2 and 3
- Vikram Udyogpuri and the Dewas to Ujjain corridor
- Nagda and the Ratlam industrial belt
- Barwaha and the Indore to Khandwa road belt
Five Reasons Indore Industrialists Order Direct From Us
- Established in 2000. Over two decades in the plate trade, spent alongside pressure part buyers.
- Approximately 2000 tonnes on the ground. A holding band of 3 mm to 20 mm keeps a rolling programme off your critical path.
- A short haul by long-distance standards. Indore sits closer to Taloja and Kalamboli than the southern centres we serve, and the freight line reflects it.
- Documentation that clears a gate. EN 10204 3.1 certification with full heat and plate traceability, issued ahead of the vehicle.
- Sizes that nest well. Widths of 1250 mm and 1500 mm against lengths of 5000 mm and 6300 mm trim offcut on common shell developments.
Send the grade, thickness, size and tonnage, and an Indore quotation goes back the same working day.
