ASTM A516 Grade 70 Plate Supplier in Chennai
Chiranjiv Steel Centre is a supplier and stockist of ASTM A516 Grade 70 plates, serving process equipment, boiler and tankage fabricators in Chennai, a city that carried the name Madras until state legislation formally changed it in 1996, along with the industrial districts surrounding it. Stock is held in two Navi Mumbai yards, Taloja and Kalamboli, and totals approximately 2000 tonnes.
Kalamboli is approximately 1,298 km from Chennai by road. The run holds NH-48 for its full length, passing Pune, Belagavi, Hubballi and Bengaluru before it enters the city from the west. Orders against ready stock are dispatched in 2 to 3 working days, and we fix the transport schedule against the transporter’s schedule when we book the vehicle rather than estimating it from a map. Plate to 20 mm ships as-rolled. Anything above 40 mm is normalised and called off the mill, and the supply condition appears on the certificate in either case.
The stock band is 3 mm to 20 mm thick. Widths are 1250 mm and 1500 mm, and lengths 5000 mm and 6300 mm. Plate beyond that band is called off the mill against order, to 100 mm, while cut-to-size work is taken from those same stock plates. Dual certification covers ASTM A516 Gr 70 and ASME SA 516 Gr 70, with an EN 10204 3.1 Mill Test Certificate raised against each plate. We set no minimum order quantity, so a single cut piece and a project lot are equally quotable.
Our stock covers plates from 3 mm to 20 mm thickness in widths of 1250 mm and 1500 mm, and lengths of 5000 mm and 6300 mm. Thicker plates, up to 100 mm, can be arranged on order. Every plate we hold is dual certified to ASTM A516 Gr 70 and ASME SA 516 Gr 70 and comes with a Mill Test Certificate as per EN 10204 3.1.
On this Page
Specifications of ASTM A516 Gr 70 Plate for Chennai Industrialists
| Supply Parameter | Position |
|---|---|
| Quantity in ready stock | Approximately 2000 tonnes |
| Stocked thickness | 3 mm to 20 mm |
| Thickness against order | To 100 mm |
| Width | 1250 mm and 1500 mm |
| Length | 5000 mm and 6300 mm |
| Condition of supply | As-rolled to 20 mm out of ready stock; normalised material above 40 mm, against order |
| Grade certification | ASTM A516 Gr 70 with ASME SA 516 Gr 70, dual certified |
| Stock held at | Taloja and Kalamboli, Navi Mumbai |
Nothing above is a closed menu. Send your cutting plan or drawing, and material outside those dimensions comes from the mill.
What a Direct Load From Our Yard Changes on a Chennai Order
| Where a Chennai order stalls | What direct stock supply alters |
|---|---|
| A mill rolling programme puts the plate four to six weeks out, and the vessel waits. | Approximately 2000 tonnes is on the ground at Taloja and Kalamboli. A confirmed order loads inside 2 to 3 working days. |
| The drawing names one supply condition and the yard books another. | Condition is settled when the order is placed, and it prints on the certificate. |
| A certificate query surfaces after the load has covered approximately 1,298 km. | Your QA desk has the MTC in hand before the vehicle leaves the yard. |
| Freight gets paid on steel that ends up as offcut on the shop floor. | We cut to your list first, so the tonnage on the truck is tonnage that goes into the job. |
| One vessel’s requirement will not fill a vehicle on its own. | Several Chennai jobs consolidate onto a single load on this route. |
| An out-of-state purchase complicates the accounts reconciliation. | Tamil Nadu takes an IGST invoice: one line, fully creditable. |
Indicative Ready-Stock Plate Sizes
| Size | Size | Size |
|---|---|---|
| 3 × 1250 × 5000 | 5 × 1250 × 6300 | 6 × 1500 × 6300 |
| 8 × 1250 × 5000 | 8 × 1500 × 6300 | 10 × 1250 × 6300 |
| 10 × 1500 × 6300 | 12 × 1250 × 5000 | 12 × 1500 × 6300 |
| 14 × 1500 × 6300 | 16 × 1250 × 6300 | 16 × 1500 × 6300 |
| 18 × 1500 × 6300 | 20 × 1250 × 6300 | 20 × 1500 × 6300 |
Stock rotates constantly against despatches, so check your own size list with us before the cutting programme is frozen.
ASTM A516 / ASME SA 516 Grade 70 Datasheet
What Documentation Reaches Your QA Desk
A Chennai incoming inspection team works from paper long before it works from steel. A certificate arriving behind the vehicle holds up unloading. Six items cover a standard despatch:
- EN 10204 3.1 Mill Test Certificate, raised plate by plate rather than batch by batch
- One certificate carrying both designations, ASTM A516 Gr 70 alongside ASME SA 516 Gr 70
- Plate number and heat number hard stamped into the plate face, keeping steel and paperwork matched through cutting
- Cast analysis, tensile figures and the recorded supply condition on that same document
- Pre-despatch inspection at Taloja or Kalamboli, by your own team or an agency you nominate
- HIC test report to NACE TM0284, arranged on the order
Sour-service qualification to NACE MR0175 or MR0103 falls outside our supply programme. Where an enquiry carries that requirement, we say so while quoting, not after the plate ships.
ASTM A516 Gr.70 Plate Price in Chennai
A516 Gr 70 plate for Chennai delivery is quoted from approximately ₹65-95 per kg ex-yard Kalamboli or Taloja for boiler quality material. Chennai market listings for the same grade in the 6 mm to 15 mm band have sat near ₹85 to ₹87 per kg, inside our ex-yard range once freight and local handling are stripped out. The transportation cost is priced as its own line item, because the tonne rate drops steeply as a vehicle fills. An offer stands for the validity printed on it, since plate rates move with mill and scrap prices.
Which Variables Move the Quoted Rate?
Six things decide the figure on any enquiry:
- Dimensions. Anything thicker than 20 mm, or wider than 1500 mm, carries a size premium over the standard stock envelope.
- Tonnage. A bulk release prices below a cut-piece order.
- Condition of supply. Normalising or stress relieving adds a heat treatment cost over as-rolled plate, and where a specification calls for vacuum-treated steel that has to be specified to the mill at the ordering stage, which affects both price and lead time.
- Supplementary testing. A HIC package to NACE TM0284 lengthens lead time and lifts the rate.
- Certificate type. EN 10204 3.1 comes as standard on every plate. Where a project specification calls for a higher level of inspection document, we confirm what can be arranged at enquiry stage before the order is placed.
- Cutting scope. Profile work and edge preparation are priced off the drawing, never off a rate card.
Reach out to us for the latest price of A516 70 Carbon Steel Plate in Chennai.
Looking for ASTM A516 Grade 70 Plates?
Which Chennai Industries Order A516 Grade 70 Plate?
Chennai’s plate demand splits along lines you can trace on a map. Refining, petrochemical and fertiliser capacity sits north of the city around Manali and Ennore, vehicle and engineering plants sit west along the Bengaluru and Trichy corridors, and bulk liquid tankage occupies the coast between them. Four buyer groups absorb most of the Grade 70 tonnage we send into northern Tamil Nadu, each on a different rhythm.
Refinery and Petrochemical Process Equipment
The Manali belt north of the city holds a dense concentration of refining, petrochemical and fertiliser capacity, and the shops built around it turn out separator vessels, knock-out drums, surge drums and column shells in this grade. Shell courses in the 8 mm to 20 mm band come straight from stock. Where the process stream carries wet hydrogen sulphide, buyers specify HIC-tested plate, and we supply that with a HIC certificate to NACE TM0284 against order. Chemical units in the Gummidipoondi SIPCOT belt place similar work in smaller lots.
Power Sector and Boiler Auxiliary Fabrication
Deaerator shells, blowdown vessels, feedwater heater shells and header components fabricated around Ennore, Thiruvallur and Kakkalur run on A516 Gr 70, a grade written for welded pressure equipment in moderate and lower temperature service where notch toughness governs selection. Every plate travels with its heat number, its plate number and the matching EN 10204 Type 3.1 certificate, so a QA file closes on the day material lands. Boilers registered under the Indian Boiler Regulations carry statutory paperwork that sits beyond that file. IBR-approved plate with Form III-C falls outside our supply programme, so where an enquiry carries that requirement we say so while quoting rather than after the plate is booked. Our plate suits boiler auxiliary and non-IBR pressure equipment, supplied against the EN 10204 Type 3.1 certificate.
Terminal and Storage Tank Fabrication Near the Ports
Tankage work follows a project programme rather than a job-shop rhythm, so fabricators here order in lots and want tonnage released in stages as erection advances. We keep the balance in Navi Mumbai and send it truck by truck against the site call-off. Shell courses, annular plate, nozzle reinforcing pads and manway necks for bulk liquid tankage around Ennore, Tiruvottiyur and Manali sit inside the stocked thickness range. Heavier bottom courses come against order. API 650 caps shell plate at 45 mm, and plate over 40 mm has to be normalised and impact tested to that standard, so we settle the thickness, the supply condition and the test scope together at enquiry stage. Our order-basis range runs to 100 mm for pressure vessel and other work outside the API 650 shell limit.
Plant Utility and Water Treatment Vessels Across the Manufacturing Belt
The vehicle and engineering plants at Oragadam, Sriperumbudur, Irungattukottai and Maraimalai Nagar buy it for the plant behind the line: air receivers, thermic fluid vessels, effluent treatment tanks and utility process vessels. Shops in Ambattur Industrial Estate and the Guindy estate take most of that work, and they also build skid-mounted pressure equipment for the desalination and water treatment plants at Minjur and Nemmeli.
Packing, Marking and Road Movement to Chennai
A haul of approximately 1,298 km puts more load on packing than a regional delivery does, and every handling point risks losing identification.
PackagingStrapped bundles as standard, moving to wooden cases or crates when thickness and quantity warrant it
MarkingHeat number and specification hard stamped on each plate, keeping the steel identifiable against its certificate throughout fabrication
InspectionYour inspector or a nominated third party is welcome at the yard, ahead of loading
Terms of supplyEx yard at Kalamboli or Taloja, or delivered into your works in Chennai
Service areaChennai city, the northern industrial belt, the Bengaluru and Trichy highway corridors, and the wider Tamil Nadu market
Despatch and transitStandard-size plate and cut sizes both load inside 2 to 3 working days once the order is confirmed; the road leg is fixed at booking
Chennai and Northern Tamil Nadu Areas We Deliver Into
Belts around Chennai and the nearby districts that we deliver A516 Gr 70 plate into:
- Ambattur Industrial Estate and Padi
- Manali and Manali New Town
- Ennore, Tiruvottiyur and Kathivakkam
- Gummidipoondi SIPCOT and Minjur
- Red Hills, Puzhal and Madhavaram
- Thiruvallur and the Kakkalur SIDCO estate
- Avadi, Pattabiram and Nemilichery
- Sriperumbudur and Irungattukottai
- Oragadam and Vallam Vadagal
- Maraimalai Nagar and Singaperumal Koil
- Guindy and the Thiru Vi Ka estate
- Tambaram, Chromepet and Perungalathur
- Chengalpattu and Kancheepuram
What Chiranjiv Steel Centre Brings to a Chennai Enquirye
Four things separate a direct order from a re-sold one:
- Trading since 2000. More than two decades in this industry.
- Approximately 2000 tonnes in stock. A holding band of 3 mm to 20 mm keeps a mill rolling programme off your critical path.
- Paperwork that clears a gate. EN 10204 3.1 certification with full heat and plate traceability, sent ahead of the vehicle.
- Standard sizes that nest. Widths of 1250 mm and 1500 mm against lengths of 5000 mm and 6300 mm trim offcut on common shell developments.
Send the grade, thickness, size and tonnage, and a Chennai quote will be provided on the same working day.
